Skroutz.eu

I was disappointed. Within two years of minimal use (<40 times) and despite taking care of it (rinsing after each use, storing in the shade), the silicone(?) started to deteriorate and stick to the touch. The visibility was not very clear and the lens had peeled off from the coatings inside within a few weeks of purchase - but it might have been my fault for that (I once put it together with the keys and they scratched it, causing it to peel off)

It was very cute while it worked, but just 3 months after purchasing it, the lightning plug simply came off/broke. Thankfully it didn't happen inside the iPhone!

I have had this particular disk connected to my iMac since 09/2021 and after 1.5 years and 11,000 hours, it started to have problems to the point where my computer would freeze when trying to access files. Although the SMART status is still verified (and I have not been able to complete a surface scan), it already has 7000 reallocated sectors (probably bad sectors). It's a shame that I ordered the same model/capacity to replace this one.

We replaced an older Siemens of the same class that was 15 years old. If it lasts as long, it will be satisfactory!

It is cute, as it appears in the photo - you can hang it with the wire it has in the packaging or use it as a ceiling light. The milky white surface was slightly distorted and simply sits on the metal frame, resulting in a slight curvature being visible

I bought them because I wanted to have a pair of headphones with a microphone to replace the jbl T205BT, which I had bought to replace the traditional Apple earpods. So I was looking for something that had a similar sound and the same ergonomics/application (semi in-ear) at a similar price (not airpods).

In general, I find them mediocre. They have several issues which I will describe below, but at the same time, they are not completely useless as they do their job.

- The sound quality (music) is terrible if you don't adjust the equalizer (always in comparison to the earpods/T205BT), but fortunately, you can fix it.
- The microphones have satisfactory noise reduction, but they have an unnatural and dry sound. Nevertheless, conversations can be held without any problem.
- It is difficult to connect them to the iPhone - occasional disconnections occur - on the first day, I had a moment when one earphone didn't recognize the other - I had to do a hard reset of the headphones 5 times for them to be recognized.
- The iOS application is very basic - it becomes apparent as soon as you run it. It rarely finds the headphones on the first (or second) try, but fortunately, you don't need to run it frequently unless you want to change the EQ settings.
- Unlike the Apple earpods and the jbl 205BT, which fit perfectly in my ear, these ones don't fit well (obviously, they have slightly different sizes).
- The headphones have touch buttons that are incredibly annoying, and you have to hold the headphones in a very strange way to avoid activating a function (e.g., when you want to take them off or secure them better in your ear). Especially for us Greeks who don't use Siri or classic voice assist, there is always a risk of accidentally activating and calling an unrelated phone number.
- They are entirely made of plastic (no silicone at the tip).
- The case is not suitable for one-handed use - you have to use both hands to take the headphones out of it.
- The case has a thin hinge that I'm afraid will break easily

Very good print quality but with one disadvantage due to thickness/weight: although for printing one-sided images the paper did not "soak", the entire page would bend, resulting in only the center of the paper sitting on the table. Depending on the application, this may be acceptable or considered a problem. On the other hand, the 160gr/m2 holds its original flat form perfectly, for an additional cost of course

Relatively good paper. On the downside, it is very difficult to distinguish which of the two sides is coated and which is not (but you can tell after printing because the difference in the result is dramatic) and that for printing images/photos, the paper slightly smudges and creates faint streaks on the back side! However, as a printing quality, it is excellent

I had also tried the single-sided 135gr/m2 from mediarange but even though for printing one-sided images the paper did not "soak", the whole page would bend, resulting in only the center of the paper sitting on the table. The 160gr/m2 keeps the initial flat form of the paper just fine. Very satisfied.