Skroutz.eu

The drill bit on the small stem bent while it was only the 2nd time I used it and the 1st time on metal to make a hole in an electrical panel with a 1.2mm sheet. I have never seen a drill bit bend so much before. It should have broken if it were made of better material and not bent. I have opened over 500 holes in panels with Bosch hole saws and I have never had such a problem. I only changed the drill bits due to wear.

It was purchased in the range of 50 euros and due to the brand, it was thought to be good. It showed less temperature from the beginning and eventually has a deviation of even 2 degrees downwards. I have a cheap one with very good measurements and I will buy 2 cheap ones, one of which will not work, for half the money to have 1 that works properly...

From the corresponding Hikvision DS-2DE2C400MW-DE(F0)(S7) that I also have, it has better software for recognizing people and animals, etc., which Hikvision does not have. Hikvision seems to have a better build and perhaps a better lens. The TP-Link has a protocol, and I connected it to a Hikvision recorder, and I can see and control it from the Hikvision software.

As soon as I put it in my bag, the part that goes inside the ear broke within a week, so I used it for a long time, 2+ years, without that part, but the sound was amazing due to the powerful speaker. Very comfortable to wear, but it's a bit difficult if you wear a mask or glasses.
Nice design, but it needs to be taken care of and treated like a piece of jewelry on the phone. Not my case.
The battery has a much shorter lifespan than stated.
The huge part with the microphone is not convenient, and lately, people can't hear me when I speak, so the device has reached its end...
I consider it overpriced for the 111 euros it was purchased for in 2021, but it wasn't used that much in the 3 years because I preferred the explorer 55, which had a better battery and was smaller.
Nowadays, there are better products at a better price.

The plug does not have that clip that holds the cable in place when you press it. It is flat and the plastic bends from the pressure. I don't know if it requires a special press, but I don't intend to buy it. Most plugs showed damage when the weather got cold and were tested with fluke networks to be properly connected. In SFTP, the metal piece is too small to embrace the cable.

They changed the plastic material of the ampoule, resulting in the tip being hard and causing the baby's nose to bleed when I use it to clean the baby's nose. If you buy old packages that are slightly larger, they have the soft ampoules that are perfect.

In the setup, it requires a little attention because it has different screws and the designs in the manual are not so clear. The device, being adjustable, is not as sturdy, especially the support handles and the incline-changing cushion. The cushions are not as comfortable as those in a professional machine and they exert pressure on the quadriceps, while I don't know how long they will last... The plastic parts smelled a bit at first. Anyway, it is value for money.

Purchased for a vacation home. It makes quite a bit of noise compared to built-in ones. It washed the dishes well with the Finish detergent tablets it came with. I don't know how durable it will be over time. I regret not getting the equivalent Bosch SKS62E32EU because it doesn't have a display and the water hardness settings are done with button combinations, and you can't see how long it takes to finish the wash. It loses 1 star for the lack of a display. I think it doesn't fit large plates. I believe I should have gotten a 45 cm freestanding or built-in one and simply placed it on the kitchen counter, it would have been better. The 55 cm takes up a lot of space on the counter and you don't realize it until you place it on the counter and have to leave gaps around it...

1st day of operation in a kitchen space for testing during installation with the cabinets. It looks nice on the cabinets, which were cut with CNC to fit exactly, and we try to operate it and say it's an amazing job...
I pull the drawer and it works normally. 2nd test, it doesn't work. Opening and closing the drawer, it literally explodes and the relay falls.
One cable was not screwed onto the power supply of the lights, so the cable touched the casing of the extractor fan with electricity.
Normally, it should have internal safety and the extractor fan, but it doesn't, and the circuit board is probably damaged...
I want to see what the service will say...