Skroutz.eu

Very sturdy in construction, the paint cracked straight down to the metal and is peeling, the jaws have a deviation of 1 to 2mm resulting in tightening first on the right and then on the left. It doesn't make a difference on metals, but it's a bit of a problem on plastics and fragile items. It has screws but is not adjustable, it's a material failure. I might have gone for a (smaller due to price) Ridgid Matador if I had known, however, with a little patience I believe it can be fixed.

So far, it hasn't managed to cut straight. Strong but it doesn't make the cut even, it loses two millimeters from edge to edge. The disc probably bends.

Copy of simply cool that currently costs 110 euros. The color is different in the photo while in reality it is very light blue. Otherwise, it's a great fridge but the extra money is not worth it.

Very good, it cuts stainless steel difficultly but it cuts it, wood and polyester easily. Also, it made a half-inch hole in my hand with the knives and I didn't feel anything. I highly recommend it ;)

Initially, the visor has a small iron piece that attaches to the bottom of the helmet, which you can see on the horizon when driving and personally bothers me a little when I have the visor open. Satisfied with the ventilation and the quality of the materials inside, it is indeed very good, as well as the color, excellent quality. Now, aerodynamically, with the visor open, it whistles a lot at speeds over 60 kilometers per hour. With the visor closed, you don't hear anything, very quiet. On a motorcycle without fairing, there is no noise regardless of the air at 100 kilometers per hour. On a fazer 600 with a small fairing, from 70 to 80 kilometers per hour and beyond, the helmet lifts up and makes A LOT of noise as the air goes straight out of the ears. I tried raising and lowering it with no result. Only when I completely stood up from the motorcycle did it stop. I would say it's good to do a test drive before buying it.

Just received it, it seems of good quality and sturdy construction. Simple and beautiful to the eye with useful functions. It works well as an everyday watch and is quite convenient on the wrist. Relatively small in size, I don't know the exact measurements but its glass is slightly larger than the water cap to give you an idea. I will dive with it in a few days and will write again.

Very noisy tool, it took a lot of work to assemble because the screws inside the tape dispenser were loose and it didn't work properly. In the end, when it did work, it struggled easily for its wattage, like a compressor. Finally, the switch broke and you had to continuously press it for the machine to work. I have sent it for repair under warranty since the switch is with a relay and cannot be easily fixed at home. I don't think a twin wheel is worth getting with a tape dispenser after all. It's better to have two separate tools. It's a shame for the money I spent.

The screws that adjust the top and bottom of the mask constantly come loose and fall in front of your face every two minutes, the straps break where they connect to the mask, and overall instead of solving problems it creates more, I would not buy it again

Owner since 2017 with one dimm 8gb and I bought a second one last year. Extremely affordable memories that, although I expected them to last, have proven to be dogs. If it wasn't for the overkill of 32gb, I would buy another set for 70 euros just to have four. As for speeds, I don't know what's going on to tell you the truth, but in 1080p 144hz games with RTX 3070 and I7-9700K, it never showed any serious bottleneck. It even played AAA titles. The Anno 1800 in the photo used 15gb RAM and ran very well, which I expected to crash.