Skroutz.eu

While I had a single roller on the shutter, it had a double one on the double glazing due to weight. On the shutter, the door can easily be removed, and then we unscrew and remove the lower horizontal aluminum frame for changing the rollers. On the double glass, we remove the door, place it on a support, and remove the two vertical side aluminum frames. The horizontal lower frame is usually stuck to the double glass with black rubber due to weight. If a screw gets stuck, we apply anti-rust oil and not too much force, as it may break the head of the screw. The rollers I got were unlubricated in the bearings, so I lubricated them and noticed a big difference. My old rollers were made of Teflon and had a diameter of 34 millimeters instead of 38 mm. Over time, the bearing of the old ones broke, and it made a scratching sound when sliding the door. Here, the technician provides a very good method for changing the rollers without even removing the door!
https://m.youtube.com/watch?v=Z2bm8MZiFgI

Very good oil can. It is almost all metal. I got it because with anti-rust sprays we pay every time for the metal packaging and also the anti-rusts do not provide long-term lubrication even though they are penetrating. So I fill my oil can with engine oil or gear oil, enriched with Molybdenum Disulfide (MoS2).

I have lubricated my electric hair clipper with WD40 and although it penetrates perfectly, it continued to make noise because there is metal-on-metal friction at a high frequency and sufficient temperature. With pressoil, the noise almost disappeared, because pressoil is 100% for lubrication and does not contain many volatile hydrocarbons, like the penetrating WD40. I believe it also works for sewing machines.

It has everything. I see quite a few other expensive LCR meters that do not recognize transistors. In this device, if we short-circuit pins 1, 2, and 3, the self-calibration process starts, and after a while, it asks us on the screen to remove the probe for the short circuit, so that the process can be completed. For this purpose, a triple leg - bridge of the pins is included. I never connect charged capacitors. They can burn the meter. At the lower pins that are labeled K and A, we can connect the cathode and anode of a Zener diode from 5V to 30V reverse polarity. If we accidentally connect a capacitor there, we may charge it to a high potential, and then if we try to connect it directly to the correct pins without discharging it first, we may burn the meter. The meter shuts down automatically without an off button. Some complain that the meter can break quickly without much use. Some suggest as a solution to remove the battery for a few minutes to restart the ATmega328 microcontroller.
https://m.youtube.com/watch?v=QQrPh9Ov8vo&pp=ygUHTFJDIHRjMQ%3D%3D
http://www.mcustart.cn/zl/esr1/TC1.html

After 3 or 4 years on the balcony in the sun, see how it turned white from red and when I went to lift it full, it shattered into pieces.

I got it because, as you present it as NaturDent, as Vegan, and as pine resin, one would expect it to be 100% natural. The product contains Polyvinyl acetate, which is synthetic wood glue

It shed quite a bit of dye in the first wash. According to the size guide in the stores, I should have chosen Large, since I have a waist circumference of 97cm. It fit me well, but at 1.83m tall, the legs need quite a bit of shortening. (The description without elastic obviously refers to the bottom of the legs and not to the waist).