The 5″ PP-1μm polypropylene replacement filter from QWaterFilters can be installed in any 5″ inch main supply filter system regardless of the manufacturer.

It is the basic and usually first-stage filter we use in every installation as it removes solid particles from the water, such as sand and rust, also serving as a pre-stage for micro-particle filtration.

High-quality pre-filter for solid particles made from polypropylene which removes medium and fine impurities, mud, sand, rust particles, soil, sediments, micro-particles, etc. The filter is non-toxic and absolutely suitable for drinking water. For proper use of the filter, it should be replaced every 3-12 months (depending on the quality of the water passing through the filter medium).

The 5″ polypropylene replacement filter consists of a mechanically constructed, single high-strength block, without internal cores or ends. It is suitable for all technical and domestic uses, thanks to the polypropylene which guarantees a high level of chemical compatibility. It has a nominal filtration of 1μm and is particularly recommended for medium and fine sediments.

The 5″ polypropylene replacement filter is manufactured according to the strictest regulations for drinking water applications. Polypropylene is suitable for many industrial applications due to its wide chemical and physical compatibility with a large range of aqueous solutions.