Suitable for application on exterior walls made of concrete, plaster, etc., and possesses thermal insulation properties. It contributes to the energy saving of buildings, thanks to its high reflectivity and low conductivity coefficient. It prevents the appearance of mold and protects the building from moisture and the carbonation of cement, due to its low vapor permeability and CO2 permeability coefficient. The impermeable membrane it creates covers capillary cracks and micro-cracks in the plaster, while it follows the contractions-expansions of the surface, remaining elastic at very low temperatures below 0°C.

• Application method: roller, brush, airless spray gun.
• Drying: dry to the core: 3±1 hours. Recoating in 5±1 hours.
• Thinning: water, at a ratio of 5% by volume. When applied as a primer, it is thinned by 30% by volume.
• Coverage: 6±1 m²/L per coat. For excellent waterproofing and crack coverage results, a coverage of approximately 3 m²/L (2 coats) is calculated.