eSun PETG

PETG is a high-performance 3D printing material with resistance to water, chemicals, and high strength. It combines the advantages of PLA and ABS.

• Stable Dimensional Tolerance: Minimal tolerance and low distortion for consistent feeding and stable prints, good layer adhesion, less stringing, no bubbles, no cracks, easy handling, with excellent surface quality.
• No Jamming & No Clogging: 1KG spool with perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. Melts well, feeds smoothly and continuously without clogging the nozzle or the extruder.
• High Compatibility: PETG has the advantages of high strength and good mechanical properties (like ABS), but also features easy printing and minimal distortion (like PLA). It is widely used in toys, stationery, electronic accessories, cosmetic containers, and more.
• Vacuum Packaging: Net weight of filament: 1KG. The eSUN filament comes in a sealed vacuum bag with a moisture-absorbing pouch, easily keeping your filaments in optimal storage conditions and free from dust or dirt before opening the sealed package.

Key Data

• Filament Type: PETG
• Diameter: 1.75 mm
• Weight: 1.00 kg
• Length: 327 m

Printing Parameters

• Recommended Minimum Printing Temperature: 230 ºC
• Recommended Maximum Printing Temperature: 250 ºC
• Recommended Minimum Platform Temperature: 75 ºC
• Recommended Maximum Platform Temperature: 90 ºC
• Recommended Minimum Printing Speed: 40 mm/s
• Recommended Maximum Printing Speed: 100 mm/s
• Recommended Maximum Cooling Speed: 100

General

• Specific Gravity: 1.27 g/cm3
• Elongation at Break: 83 %
• Bending Strength: 58.1 %
• Bending Modulus: 1073
• Impact Strength: 4.7 KJ/m2