eSun PETG

The PETG filament is a 3D printing material with a high cost-performance ratio, water resistance, chemical resistance, and high durability. It combines the benefits of PLA and ABS.

• Stable Dimension: Minimal tolerance and low deformation for continuous feeding and consistent prints, good layer adhesion, less stringing, no bubbles, no cracks, easy handling, with excellent surface finish and high accuracy.
• No Jamming & No Clogging: 1KG filament spool, perfect roundness and very tight diameter tolerance, well-wound form, does not overlap or tangle. Melts well, feeds smoothly and continuously without clogging the nozzle or the extruder.
• High Compatibility: PETG has the advantages of high durability and good mechanical properties (like ABS), while also having ease of printing and minimal deformation characteristics (like PLA). It is widely used in toys, office supplies, electronic accessories, cosmetic containers, etc.
• Sealed Packaging: Net weight of filament: 1KG. eSUN filament comes in a sealed vacuum bag with a desiccant bag, easily keeping 3D printing filaments in optimal storage conditions and protected from dust or dirt before opening the sealed packaging.

Key Data

• Filament Type: PETG
• Diameter: 1.75 mm
• Weight: 1.00 kg
• Length: 327 m

Printing Parameters

• Recommended Minimum Printing Temperature: 230 ºC
• Recommended Maximum Printing Temperature: 250 ºC
• Recommended Minimum Platform Temperature: 75 ºC
• Recommended Maximum Platform Temperature: 90 ºC
• Recommended Minimum Printing Speed: 40 mm/s
• Recommended Maximum Printing Speed: 100 mm/s
• Recommended Maximum Cooling Speed: 100

General

• Specific Weight: 1.27 g/cm3
• Elongation: 83%
• Bending Strength: 58.1%
• Bending Modulus: 1073
• Impact Strength: 4.7 KJ/m2