Set the delivery location to see products according to your choice.
Headphone amplifier with 4 independent stereo outputs, each with its own volume control.
See full descriptionSelected Store
Stock 2 pieces
2 years warranty
Commercial Sound Cards
Hi-Fi Amplifiers
Headphones
Commercial Sound Cards
Commercial Sound Cards
Prices are calculated for:Luxembourg, Other Payment Options
If you are monitoring more than one musician at a time or if everyone in the group wants to hear the playback, you need a distribution system. A distribution system allows everyone to listen and control the volume of their headphones. The compact and versatile HA400 can power up to 4 pairs of headphones and up to 4 independent volumes, with excellent sound quality – even at maximum volume!
You can use this ultra-compact stereo headphone amplifier with almost any headphones – four of them simultaneously, to be precise! Allow up to 4 different people in your studio to listen to the main mix during recording, and each listener can set their own preferred volume level using the dedicated output level controls. The HA400 contains 4 high-power stereo amplifiers that maintain the highest sound quality even at maximum volume levels. Ultra-low noise 4580 operational amplifiers are used for excellent sound performance – these are the same operational amplifiers found in 'full-size' audio equipment – as well as a dedicated 12 Volt DC adapter.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
At @lexpress it costs exactly 11 euros. I got it from there, it's exactly the same. For sharing and boosting small speakers and headphones, it's perfect. Up to 75%, as the others said here, after that it creates interference. However, it is more than enough. Use good adapters and cables, otherwise you will have issues.
For its price, it is a good tool. I have the BeyerDynamic DT 770 Pro (80 Ohms) headphones and the Focusrite Scarlett 2i2 (2nd gen) interface.
The Focusrite barely covered me on its own, I just didn't want to have the switch at 90-95% (it was barely audible and had a hiss from the console).
Now with the amplifier, the volume on the console is at ~75% and the volume on the Behringer is also 75%.
It could work at lower levels, but in Windows I always have the volume at -10db (on a digital mixer). Generally, I prefer to lower the volume a bit in applications. I want to have headroom and I prefer to change it digitally, so I can save the levels exactly each time. In analog hardware, the levels are not visible or I usually don't remember them.
Noise starts to be heard at around 80% volume on the Behringer.
In short, it does its job.
Positives:
- Affordable.
- Four different and independent headphone channels.
- There is no sound transfer from one channel to another among the 4 ports it has.
- Generally clean signal up to ~80% volume.
Negatives:
- Build quality. The knobs are wobbly, not stable. But expected for its price. After a power outage and being connected to a surge protector, one of the four ports (which was active at that time) started producing an electric buzzing noise. I disconnected and reconnected it and did various tests. Now it appears "randomly" while turning the switch and also disappears randomly. When the switch stops turning, the noise stops as well. So it works, but I am concerned about the future (especially if the power goes out again). The other devices on the same surge protector (including the PC, Focusrite, DBX 286s, speakers) did not suffer any damage.
For 30 euros, it does magic tricks. Personally, I had the Focusrite Scarlett 2i2 3rd Gen, which supports up to 200 ohm headphones, and I bought 250 ohm headphones (BeyerDynamic DT 880 Pro), so it already provided satisfactory volume, but I wanted more for mixing. I also bought a small balanced cable (6.3mm - 6.3mm) to connect it from the sound card to the headphone amp, and now I can connect up to 4 headphones instead of 1, and the volume is MORE than enough, regardless of the fact that it is supposed to be for 80 ohm headphones. The reason is obvious, both the sound card and the headphone amp provide power.
Pros:
- Very cheap
- Very practical
- Provides the desired volume
- Can connect up to 4 headphones
Cons:
- Although the materials for the amp are good, the cable seems very cheap for the power, but it does its job
- Does not include a 6.3 balanced cable to connect to a sound card (but you're only paying 30 euros, don't expect everything to be included)
Very honest and correct, the sound quality does not have any noticeable distortion and is quite satisfactory even for me, who wants it for mixing and music production. At high volumes, there may be some distortion, so I recommend not turning the knobs all the way up, neither on the sound card nor on the amplifier, to avoid any distortion. Also, be careful not to work for extended periods at high volumes because it can hurt your ears and you may lose frequencies before becoming grandparents.
Quite WEAK! And very EXPENSIVE for its quality!!!! Otherwise, it does the job for which it has been designed, otherwise it would not be purchased by people who need this job!!!! However, it could have been a little stronger in frequencies and volume!
The existing reviews are very detailed, and I will only add a few things from the perspective of a beginner, as it was purchased for simple, household use. It is a stereo headphone amplifier AND splitter, meaning you can connect up to 4 headphones/devices, controlling the final volume for each separately.
Both features work flawlessly, as I did not notice any bleeding in the splitting and the final amplification is very satisfactory, especially considering the low cost of purchase. The same applies to the build quality of the device and the power supply.
Finally, in response to my own question in the thread, YES, it can amplify the final volume of sound to some extent even in speakers (multimedia and cheap HiFi systems), with the appropriate connections, adding a bit of "volume," even if it is not intended for this purpose.
Note that all the ports of the device are 1/4 (6.35 mm), so you will need the corresponding adapters/converters if you want to connect cables or headphones with the classic 3.5 mm jack.
I bought it in order to enhance the signal from my computer's DAC to the DT 990 PRO (250 Ohm).
At first, I tried the headphones directly on the DAC because the motherboard has high-quality audio components (Z390 Aorus Master), but I immediately realized that it wasn't enough for 250 Ohm and they needed amplification. Since I was financially tight at that time and couldn't afford to spend 100-300 euros on a powerful amplifier, I decided to get something cheap to do the job and see how it goes...
Searching here and there on the Internet, I ended up with this splitter-amp because I saw on YouTube that despite claiming to have an 80 Ohm output, it can provide enough volume for 250 Ohm headphones.
So, with 25 euros, I feel completely justified in my choice, as it can deafen you at 100%...
In terms of quality, it's perfect up to 75-80% of the dial, but beyond that, it becomes so loud that it causes slight distortions in the sound.
For anyone who really wants a cheap amplifier for professional headphones, I highly recommend it!
If one considers what the guy says in the review below (and it's true for professional-grade equipment), that with 25 euros you can't even get a cable, then you understand that we're talking about a VFM (Value for Money) king in its category.
Normally, with 25 euros you don't even get a cable. This device here is a public address. Its purpose is to distribute audio with adjustable volume to multiple (4) headphones simultaneously, for example. I simply needed it to amplify a line signal channel, so that I could power a 120LED VU meter device and give it more Ampere to make it more sensitive. It can probably handle quite high levels of intensity, from what I have observed.
Verified purchase
After a while, there is noticeable distortion in the sound when the volume is increased.
Verified purchase
Tool good finally I enjoy music as I want.
Verified purchase
He promises nothing but does what he must with dignity!
Verified purchase
 Behringer HA400 Portable Analog Headphone Amplifier 4 Channels with Jack 6.3mm |  Behringer P2 Portable Analog Headphone Amplifier Single Channel with Jack 3.5mm |  N-Audio HA400 Desktop Analog Headphone Amplifier 4 Channels with Jack 6.3mm |  Behringer PM1 Headphone Amplifier Channel |  HA400 Portable Analog Headphone Amplifier 4 Channels with Jack 6.3mm |
|---|---|---|---|---|
| from 38,35 € | from 50,45 € | from 27,54 € | from 34,00 € | from 25,00 € |
| ManufacturerBehringer | Behringer | N-Audio | Behringer | OEM |
| Available through Skroutz | Available through Skroutz | Available through Skroutz | Available through Skroutz | Available through Skroutz |
| Amplifier TypePortable | Portable | Desktop | - | Portable |
| More Specs |
Deals
Technology
Home & Garden
Fashion
Sports & Outdoors
Health - Beauty
Baby & Kid
Auto - Moto
Business - B2B
Books