Special acid-free cleaner for all steel and alloy wheels.
Features
The color change indicates that the product is working.
Easy to clean and finish.
Reduced brake dust adhesion with the formation of a protective film on the wheel rim.
Does not contain acid.
Protects the rim surface and wheel bolts.
Also removes rust particles.
Simple and economical to use.
The aerosol can be used with clean air as a propellant.
Does not contain flammable or harmful propellant gases.
Attention:
Do not apply to hot wheel rims or in direct sunlight and do not let dry. Protect from frost.
Application
The combination of active agents without acids removes even the most stubborn dirt, such as brake dust, road pollution, oil and rubber residues, and surface rust particles from all alloy wheels.
Usage
Spray the wheel rims completely and evenly from a short distance (approximately 20cm). Allow it to soak for 3-5 minutes depending on the degree of contamination. The active agent turns from red to violet while producing results. Then rinse thoroughly with a strong water jet or high-pressure cleaner.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can
report it here.
The spray does an excellent job, but it only lasts for ONE use if the rims are very dirty. I will have to order a second spray for regular cleaning of the rims now that I have tried it and confirmed its effectiveness.
What it promises, it definitely delivers! It was used on a spare wheel that had never been cleaned for several years and had accumulated dirt over time. By spraying it, it immediately turned deep red (as there was a lot of dirt) and emitted an unpleasant odor. I used a brush to scrub the wheel after letting the product work for about 5 minutes (be careful, it stains the surrounding area and leaves difficult stains) and after applying a second spray and scrub, it looked like new! It polished and removed even the slightest previous blackness. I definitely recommend it as it does exactly what it promises, but I consider its price a bit expensive compared to the quantity of the content. I used about half a bottle for two passes on one wheel.
Yesterday I tried it for the first time together with a pressure washer on one of the four wheels to see if it really does the job. I hadn't washed the car and especially the wheels in order to make them look like new. First, I used the pressure washer to remove the dirt. Then, I sprayed it on all parts of the wheel and waited for 3-5 minutes as stated in the instructions. After that, I rinsed it with the pressure washer. Not all the dirt in the difficult areas of the wheel had been removed. So, I repeated the whole process but this time, as the instructions suggest, I also used a toothbrush for the difficult areas. I scrubbed the difficult areas without needing much force and the old stains easily disappeared. Guys, the wheel looked brand new. Only 2-3 scratches remained from small impacts that I had caused. However, all the dirt that had been there for years was gone and the wheel looked like new.
What I suggest and will also do from now on is, the first time you apply the spray, after waiting for 3-5 minutes as the instructions say, to scrub all the difficult areas with a toothbrush. This way, you might only need to use the spray once.
There is in a well-known car wash chain in Athens at a cheaper price. Very good and doesn't need any further cleaning after the first time at the end of the wheel.