Skroutz.eu

UPDATE:
WARNING. I don't know if ours happened to be defective or if they are all like this, but the ring can be easily removed with a little pressure, even if the screw is in place, which is of course dangerous, especially if you have children. It shouldn't unclip so easily. For me, it's a design flaw.
-----------------------------------------------------------------------------------------
The first impressions after a week of use are very good.
Quite stylish and the assembly is relatively easy, (I only had a little trouble snapping the ring in place).

I find it quiet, because so far the motor or its plastics do not make noise from vibrations. Of course, the faster you increase the speed, the noise from the air produced is unavoidable, but it doesn't bother us. In the midst of a heatwave, we are using it on the 14th speed and we have it blowing directly on us.

Two minor drawbacks:
1. It doesn't remember the last settings. Not particularly important, just somewhat annoying because every time you turn it on, you have to press the button 14 times to get to the desired speed.
2. WHY is the remote SO SMALL? We are sure we will lose it at some point. Generally, I don't understand this trend for such tiny remotes.

In the heat and with a temperature of 31C in the room, don't expect it to cool you down, but for those who don't want air conditioning in the bedroom and don't mind having it blowing in their faces, it's just fine.
It could, however, be cheaper..

In old air conditioners, it takes a little patience. Mine is 20 years old "brand, you burned me" and found it in the automatic search with code 2360... I spent about 20 minutes with my finger on the trigger.
USEFUL INSTRUCTIONS for automatic synchronization
1. Press Select for 5 seconds, with the remote control facing the air conditioner, and it starts searching.
2. Once it finds your model, you will hear a beep from the air conditioner and stop it immediately by pressing the on-off button. This stops the search.
3. Press Select again and press the down temperature button once to go to the previous code and press OK. Test if it turns on. If not, try the same method with the previous code. If it still doesn't work, continue the automatic search by repeating steps 1-3.
SETTINGS MAINTENANCE
This has the intelligent cool or heat (depending on what you have) activated by default. So as soon as you turn it on, it always goes to these settings. I pressed the intelligent Cool (I Cool) for 10 seconds and it was deactivated. From that moment on, when I turned it on again, it showed me the last saved settings.