Skroutz.eu

the size mentioned does not correspond to the actual dimensions and I had trouble fitting it on the grill that I built

I would like to mention that as soon as I started the machine for the first time, I heard an indistinct metallic noise. I closed and opened it many times, and it was always the same. Eventually, I discovered that pieces from the metal wings inside the engine were broken and rotating internally (photos). With sudden shaking, I managed to remove them from the holes shown in the photo. I didn't open it to see what happened internally, but I started using it for my work. Apart from that, I didn't encounter any other problems, and I believe it was a factory defect. I didn't ask for a replacement (too much hassle for €120), but if it had a chain with a smaller pitch to reduce vibrations, it would be very positive. For its price, it is very good

The first image and impression is very positive, clearly superior to the UP86 which I found heavy and tiring. I prune cherry trees, usually 20-30 mm branches. In the first 200 trees, it was excellent, but then the terminal started to come out on the lower side until it completely loosened. The problem was solved with silicone glue. When I cut thick and many branches, the belt loosens a bit and needs tensioning. After 500 trees, the plastic holder at the belt's exit under the scissors started to come out. The problem was solved with double-sided glue, but at some point, the scissors got stuck and required more frequent lubrication. Although I work it very hard, it is worth its money and meets my requirements. I highly recommend it