It loses a bit of attention! Other than that, a very good sturdy tool, I had worked with DeWalt for years and I can't say that the change disappointed me.

I was about to buy it and was looking for a store to find it on display.
I found it and guys, it's not worth it, the guide that adjusts the degrees doesn't lock at 45 or any other, it just makes a sound like it's locking, but you can move it.
So you will never cut with precision.
Also, there is no side guide for when you work on the miter saw table, it is completely free.

I wouldn't choose it.

I have had it in my possession for about a year. Very powerful motor and immediately reaches all speeds. As for the negatives, I have to say that 1) the disc loosens and requires frequent tightening, 2) the height of the disc easily gets displaced due to vibrations, resulting in cutting deeper than desired, 3) I have not yet managed to find the exact settings for cutting with absolute precision.
As for the positives, I want to point out that in terms of construction, it gives me the confidence that it will withstand the test of time, which is why I chose to purchase other tools from the same company (Bulle).
If I were to change something, it would be to get a single-work rail circular saw and a separate benchtop circular saw.

Very good tool. I will agree with the gentleman about the laser, it would be very helpful due to the table obstructing the visual field. Also, pay attention to the button at the bottom of the mechanism for the cuts made on the table, as it may sometimes remain pressed, resulting in the lever not functioning when you reset it for vertical cuts. Don't panic, just press it well with a pencil or pen to release it. Also, the motor reaches its full speed almost instantly upon starting. I would prefer a gradual increase in speed to prevent motor strain. The cutting disc is large and satisfactory at 250 mm, but its capabilities on the table are slightly limited because the height of the disc is only 4 centimeters. It is a well-built machine with minimal plastic parts, mainly around the motor and handle. Considering all that it offers for the price, it is difficult to find something more worthwhile.

I have it for about a year, I use it almost every day, so far it hasn't presented any problem, for its price it is quite good

I have had the tool for about 6 months mainly for amateur use and I am very satisfied. It has not presented any problems and it is quite powerful with many different cuts. The only thing I would like it to have is a laser that shows you where you are going to cut because before I cut, I have to raise and lower the disc to see where I am going to cut, and if I move, I have to check it again. Besides that, it is a reliable tool for amateur use. For professional use, someone who is a professional will tell us.

Very good for its price as a hobby tool.
One flaw. The degrees are attached with a sticker that comes off from the force of the saw blades flying over it during cuts.
Also, the dust collection bag is useless, but most of them are like that.
It gets 3 stars because it has a large cutting height and depth.
It's worth buying.

The price-performance ratio is very good considering that tools of similar power and diameter from well-known brands cost around a thousand. You need to spend some time with the machine to bring it to 90 degrees both vertically and horizontally, but after that, it cuts very well and with great power. I imagine that even expensive models would require something similar. Personally, I also bought an 80T blade, so I believe it has nothing to envy from expensive models anymore. I was considering deducting one star because of the placement of the sawdust extraction at the back of the blade, but in the end, I decided that it doesn't bother me that much.

Είναι έτοιμο για χρήση.
Διαβάστε το manual αν δεν έχετε ξαναχρησιμοποιήσει θα σας βοηθήσει να μην κάνετε κάτι λάθος και για την ασφάλεια σας είναι κατατοπιστικό.
Γρήγορο και ακριβές στο κόψιμο σε όλες τις θέσεις και με ελάχιστο θόρυβο, το laser του στοχεύει εκεί που θα πάει ο δίσκος, η σακούλα μειώνει αρκετά τη σκόνη από το κόψιμο που πετάγεται
Για οικιακή χρήση είναι εξαιρετικό.
H θήκη για τις μπαταρίες του laser θέλει προσοχή γιατί είναι φτηνιάρικη