Hard floors and low-pile carpets are cleaned independently and systematically by the smart cleaning robot RCV 5. Dry debris is transferred to the integrated waste container by the rotating brush, the side brush for edges, and the fan.

The ultrasonic sensor detects carpets that would be better cleaned using the Auto Boost function for maximum suction power. The RCV 5 not only vacuums but can also mop. In mopping mode, carpets are automatically avoided. 

Through the app, the RCV 5 is sent on an exploration tour and will automatically create a map of the rooms by detecting the environment (LiDAR). Individual cleaning parameters can be set for each room. For example, which rooms should be vacuumed, mopped, or not cleaned. Thanks to the dual laser system with a camera, the top model RCV 5 also detects and avoids flat obstacles such as cables, socks, or shoes. 

Additional sensors prevent the device from falling, for example, down the stairs. For cleaning, you can easily start the RCV 5 via the app, using a predefined individual program or by pressing a button on the device. If the cleaning robot needs assistance, in many cases it will tell you through voice output.

• Drop sensors reliably prevent the RCV 5 from falling down stairs or dropping.
• The sensors scan the floor. If a large drop is detected, the controller receives a signal that triggers the robot to turn.

• As a manufacturer based in Germany, Kärcher places great importance on data protection and takes special care to ensure that all applicable legal requirements in this matter are met.

• Always well-informed: the RCV 5 uses voice output to provide important information and share the current status.
• If the RCV 5 robotic vacuum cleaner needs assistance or service, in many cases it will tell you via voice output.

• The app can be used to customize many of the settings to match individual preferences.
• Using the app, you can configure the RCV 5 cleaning robot and control it from any location. Even if you are not at home.
• Information about the current status of the device and a screen showing the current cleaning progress are available through the app.

• The app can store multiple maps, e.g., for multiple floors.
• It is possible to set zones where you do not want the robot to go and clean (e.g., cat scratcher, play areas in children's rooms, or obstacles that the robot cannot bypass).
• Set selected areas to be cleaned multiple times, cleaned with intensive cleaning mode, or mopped with more water.

• Setting different cleaning parameters in the app for individual room areas (e.g., suction power or water volume, number of cleanings per surface).

• You can schedule cleaning times and create cleaning plans through the app.
• The RCV 5 independently starts cleaning trips based on scheduled dates/times.