AnyCubic Tough Resin 2.0 (Black)

The AnyCubic Tough Resin 2.0 is a unique resin that exhibits increased durability. It is relatively flexible and crack-resistant, making it possible to print tiny parts and delicate models. The 3D models made with this resin are less likely to suffer damage, even if they fall from a height.

The Tough Resin 2.0 is made with environmentally friendly materials that do not cause irritation or intense odors. It is compatible with most LCD 3D printers and is the ideal choice for prints that require greater precision. It is suitable for printing in the wavelength range of 365nm to 405nm, allowing for optimal results. Additionally, the resin exhibits less shrinkage, resulting in your models being full of details and their surface being impeccably finished - especially when used in combination with AnyCubic printers.

Physical and Chemical Properties:

• UV wavelength: 365-405 nm
• Density: 1.10-1.15 g/cm³
• Viscosity: 450-500 cP
• Hardness: 82-84D
• Tensile strength: 30-42 MPa
• Elongation at break: 60-72%
• Shrinkage during molding: 5.1-6.2%
• Flexural strength: 42-52 MPa
• Flexural modulus: 1500-2000 MPa
• Heat deflection temperature: 50-55°C
• Exposure time for bottom layer: 20-40s
• Normal exposure time: 1.5-3s (for color screens 8s)
• Resin cleaning: Alcohol
• Shelf life: 1.5 years
• Color: Black

Recommended Printing Parameters for Various Anycubic 3D Printers (Photon Mono M3 Pro, Photon Mono 6K, Photon Ultra, etc.):

• Layer thickness: 0.05 mm
• Exposure time: 1.5s to 3.6s
• Off time: 1s
• Bottom layer exposure time: 20s to 35s
• Number of bottom layers: 5-6
• Anti-aliasing: 1
• Z Lift distance: 5mm to 10mm
• Z Lift speed: 2mm/s to 6mm/s
• Z Retract speed: 2mm/s to 6mm/s