22,00€
Express deliveryTuesday, 18 February
+14,00 €shipping cost
Selected Store
Stock 18 pieces
Similar products
All shops
Prices are calculated for:Luxembourg, Other Payment Options
- 22,00 €
Description
Devil Design's PETG is manufactured in Europe. Extremely hard material with high strength.
The PETG (Polyethylene Terephthalate Glycol-modified) filament is similar to PET with the unique difference of the addition of glycol making it harder with greater clarity. PETG has higher durability and is...
Manufacturer
Specifications
- Product Number
- PETG-1.75-GRAY
- Material
- PETG
- Colour
- Gray
- Diameter
- 1.75 mm
- Weight
- 1 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
Reviews
Reviews photos
Reviews by our members
- This review is about the colour: Black
I bought this specific petg in black color, I use it on ender5 pro Bowden tube. It works quite well at 226 degrees with 6 retractions without stringing. The only negative is that it is quite glossy.
Translated from Greek ·Did you find this review helpful? - This review is about a variation of the product
The Devil Design filaments have never caused me any problems with prints, whether with PLA or PETG, and I have tried several brands. For me, they are the best affordable filaments on the market.
Translated from Greek ·Did you find this review helpful? - This review is about the colour: Red
It did not leave me satisfied...
With the Creality Ender Pro 0.6 nozzle printer, after many tests and different settings, unfortunately, it does not give me good results.
I would not buy it again.Translated from Greek ·Did you find this review helpful? - This review is about the colour: White
From three different brands that I have worked with, I think this is the best of all. It works like PLA, but I don't know about the durability of the printed object. However, it worked well on both printers (one with a large bowden that had issues with other brands) without any fuss
Translated from Greek ·Did you find this review helpful? - This review is about the colour: Black
I got it as my first material for an ender 3 v2 neo. With cooling off, 230c nozzle and 75c bed, 30mm/s outer layer printing and 65mm/s print speed, 6mm retraction and 40mm/s retraction speed, I have no stringing at all, and the bed adhesion is reliable up to a height of 5cm that I have printed. The black tends more towards dark gray and brings a little gloss, which in some parts that I sanded with sandpaper, became a nice matte finish.
Translated from Greek ·Did you find this review helpful? - This review is about the colour: Turquoise
Very easy to print compared to other PETG at the same price. It doesn't have much stringing (for PETG). The prints come out strong.
I have tried it on an Artillery Hornet printer with 0.4 and 0.6 nozzles and blue tape on the build plate and I had absolutely no problem with printing.
For initial settings, you can try the following (It gives me a result almost like PLA):
Bed temp: 90
Extruder temp: 245
Speed: 50mm/s
Retraction material: 2mm
Retraction speed: 40mm/s
Fan speed: 0% and 10% from the 5th layerThe Blue Transparent that I tried is, in my opinion, a very impressive color.
Translated from Greek ·Did you find this review helpful? - This review is about the colour: Red
PETG is great, I have tried black, red, and dark gray. I print at 230°C/80°C with a 0.6mm volcano nozzle and a layer height of 0.3mm. It adheres well to the print surface but requires a large and fast retraction of 7-10mm/80mm/sec to prevent stringing. Before, I used ABS with an open printer and had issues with warping and shrinking. Since switching to this PETG, I have been relieved. The only thing that bothers me is the shine, hopefully they will release a black matte version soon.
Translated from Greek ·Did you find this review helpful? - This review is about a variation of the product
I don't know why it received such excellent ratings, personally it leaves "hairs" in the print, so it probably needs a larger retraction than 3mm. The Dark Gray that I tried has a glossy finish, so be careful if that's what you desire. I couldn't print with a steel nozzle even at 280°C, but I printed with a brass one without any problems at 245°C/80°C (and possibly even lower temperatures that I didn't try). However, I had detachments on objects with a small support surface, which can be solved either with rafts or by increasing the bed temperature to 90°C.
In terms of durability, it seems good to me, hence the final rating.
Translated from Greek ·Did you find this review helpful? - This review is about the colour: Black
Very good! First time working with PETG, I didn't encounter any problems from the first print onwards!!
Highly recommended!
Translated from Greek ·Did you find this review helpful? - This review is about the colour: Black
Excellent first time PETG glossy finish, ender 3 v2 -0.4 nozzle 250c- 75c bed Powder Coated PEI
Translated from Greek ·Did you find this review helpful? - This review is about a variation of the product
Although it is my first roll and I haven't tried from other brands, I can say that it is quite good and easy to print. It has good elasticity and durability. For everything I have tried so far, I am completely satisfied.
Translated from Greek ·Did you find this review helpful? - This review is about a variation of the product
Θα γράψω την κριτική για το γκρι γιατί αυτό πήρα αν και νομίζω ότι ισχύει για όλα τα pla αυτής της εταιρίας.
Το πλαστικό είναι μέτριας προς καλή ποιότητας.
Αυτό όμως που με εκνεύρισε απίστευτα και ήταν ο λόγος που ήθελα να το ξοδέψω γρήγορα για να φύγει από μπροστά μου και να μην ξαναπάρω άλλο πλαστικό αυτής της εταιρίας είναι το κακό τύλιγμα του νήματος.
Μπλεκόντανε πάρα πολύ συχνά και μου έχει χαλάσει πάρα πολλές εκτυπώσεις γιατί άφηνα τον εκτυπωτή χωρίς επιτήρηση για 15 λεπτά.
Δεν το συστήνω γιατί μέχρι να μου τελειώσει απόκτησα ψυχολογικά και πια δεν εμπιστεύομαι άλλα νήματα που ξετυλίγονται κανονικάDid you find this review helpful? - This review is about the colour: Blue
Worthy choice at an affordable price. I have printed ~0.5kg so far with very good results, as long as you have properly calibrated the bed/extruder and flow.
On the stock Ender 3 Pro, I print with an initial layer at 240° and then at 230° without any issues (adjust the bed to 80°).Translated from Greek ·Did you find this review helpful? - This review is about the colour: Black
Very good, the color is quite glossy and easy to print, at least it didn't give me any problems and I am completely satisfied, I work with it at 250/60
Translated from Greek ·Did you find this review helpful? - This review is about the colour: Black
I had no issues with printing using the Prusa MK3. The only thing that bothered me a little is the packaging bag that does not seal airtight after opening.
Translated from Greek ·Did you find this review helpful? Verified purchase
This review is about the colour: WhiteGood and stable value
Translated from Greek ·Did you find this review helpful?Verified purchase
This review is about the colour: BlackIt's decent for the money it costs. As long as this exists, I won't buy PLA again.
Translated from Greek ·Did you find this review helpful?Verified purchase
This review is about the colour: WhiteVery good. Everything I have printed has come out perfect!
Translated from Greek ·Did you find this review helpful?Verified purchase
Did you find this review helpful?Verified purchase
This review is about the colour: BlackVery good product!!!!
Translated from Greek ·Did you find this review helpful?Verified purchase
This review is about a variation of the productSatisfied but definitely needs a dry box, depending on your area of course.
Translated from Greek ·Did you find this review helpful?Verified purchase
This review is about the colour: RedEasy, shiny, and without complaints, ender 3 v2 - 0.6 / 235c / 80c, PEI
Translated from Greek ·Did you find this review helpful?Verified purchase
This review is about the colour: BlackVery good for amateur use.
Translated from Greek ·Did you find this review helpful?Verified purchase
This review is about the colour: Blackmaybe the best for 3D prints
Translated from Greek ·Did you find this review helpful?Verified purchase
This review is about the colour: BlackI received it very quickly. It does its job perfectly. Thank you
Translated from Greek ·Did you find this review helpful?Verified purchase
This review is about the colour: BlackVery good, the print comes out good. I print with 240/70 on Ender 3.
Translated from Greek ·Did you find this review helpful?- This review is about the colour: Black
Very good.. spreads amazingly..
Translated from Greek ·Did you find this review helpful? - This review is about a variation of the product
very good quality, at 225th, on anet a8
Translated from Greek ·Did you find this review helpful? Verified purchase
This review is about the colour: YellowVerified purchase
This review is about the colour: Black
Deals
Technology
Home & Garden
Fashion
Sports & Outdoors
Health - Beauty
Baby & Kid
Auto - Moto
Business - B2B
Books