The Anycubic Water-Wash Resin+ allows you to save time on cleaning your prints, as it only requires water to clean your 3D prints after printing. It is important to wear gloves before use to avoid direct skin contact.

You can soak the model in clean water, rinse it, or wash it ultrasonically, and then dry and cure it. Using the Anycubic Wash & Cure device is recommended for perfect results. The residual liquid should not be poured directly down the drain but should be fully treated with curing or heating to evaporate the water.

Tests have shown that models printed with the Anycubic Water-Wash Resin+ can be stored for 3 years in a natural environment without cracking. The test conditions include neutral salt (5% concentration), temperature (35°C), and humidity (95%).

The printing accuracy is improved due to low shrinkage, allowing each model to be printed with precise details. It is important to remove the model from the water in a timely manner to avoid distortion.

The Anycubic Water-Wash Resin+ has a mild odor that is not strong, ensuring a better printing experience. Although the resin is not strongly scented, it is recommended to maintain good ventilation in indoor spaces during printing.

The resin is compatible with a range of 365-405nm and is suitable for most resin 3D printers on the market. You can achieve better results with Anycubic LCD-based SLA 3D printers.