Module Parameters:

• Input Voltage: DC5-30V
• Input Current: 8A (MAX) peak 10A (6A for long operational duration)
• Standby Current: 4mA (operating voltage may vary, errors may occur)
• Output Voltage: 1.25-30V continuously adjustable
• Output Current: 10A (MAX) (5A for natural heat)
• Output Current Range: 0.2-10A
• Operating Temperature: -40 to +85 degrees
• Operating Frequency: 150KHz
• Conversion Efficiency: Typical 91% (12V to 12V5A) maximum 93%
• Overcurrent Protection: Yes
• Short Circuit Protection: (current limiting protection)
• Overtemperature Protection: (automatic output voltage reduction after overheating)
• Reverse Polarity Input Protection: None (in case of emergency, please insert the diode)
• Output Reset Protection: Yes, no additional diode needed for charging.
• Connection: Terminal output (IN is the input, OUT is the output)

Output Current Adjustment Method:

• 1. Adjust the CV potentiometer according to your load requirements, the output is set to the required voltage.
• 2. The CC potentiometer turns counterclockwise about 30 turns (i.e., the output current is set to minimum), connected with LED, set the CC potentiometer to the desired current value. After charging, if the battery is fully discharged, adjust the CC current to the desired value (make sure to use the batteries in full discharge before transport, as having residual energy will cause the charging current to be lower). Do not use the short-circuit method during transport, as the module's circuit structure does not support transport with a short circuit.

Packaging includes:

• 1 x Automatic Adjustable Lifting and Reducing Capability Module