25,62€
from Cosmo-market
Deliveryuntil Thu, 20 Feb
+14,00 €shipping cost - sent from Greece
Selected Store
Buy together
Similar products
All shops
Prices are calculated for:Luxembourg, Other Payment Options
- 27,41 €
- Official reseller25,62 €
- 27,00 €
- 51,50 €
- 25,78 €
Description
Excellent wood texture. High-quality wood color and clear texture make people feel like they are back in nature. Neat winding, smooth feeding. Reduce filament waste, save time, and improve the success rate of printing.
Environmentally friendly materials. Based on PLA as the main material, it continues the advantages of easy molding, non-warping, and low shrinkage of PLA. Stable printing, low shrinkage. Stable performance for good creations, meeting your expectations for high-precision prints.
Printing Temperature 190-230C Packing Size 210*210*70mm Printing Speed 40-90mm/s
Manufacturer
Specifications
- Product Number
- 3301130001
- Material
- Wood
- Colour
- White
- Diameter
- 1.75 mm
- Weight
- 1 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
Reviews
Reviews photos
+9Images
Reviews by our members
Very good filament. It took a little time to find the settings needed to avoid stringing, but after that, the 6 rolls I bought printed excellently.
Translated from Greek ·Did you find this review helpful?It is what it says, PLA with wood powder. I didn't have any issues with printing at a speed of ~100mm/s. The printer needs to be very dry and properly calibrated for the first layer to come out right. It helps if you have textured PEI. It doesn't require a high temperature of ~195C. I printed it with a 0.5mm nozzle to avoid any chance of clogging due to the wood.
Translated from Greek ·Did you find this review helpful?It took me a lot of testing to find the right settings, but the final product is worth it! I already bought extra packages.
I printed on an Ender 3 Pro and I would recommend:
45-50mm/s printing speed, 210-220 nozzle temperature. Definitely use a nozzle with a diameter of 0.5mm or larger, ideally hardened steel. The print will definitely have stringing, but it cleans up very easily.Translated from Greek ·Did you find this review helpful?Nice material, I tested it in trials/calibrations and ended up with 210/60 bed and I have nice quality and full speed in the 3D printer. I will buy again.
Translated from Greek ·Did you find this review helpful?Difficult to use (I have previously used a wood filament from another brand without any issues). I don't know if it's the composition or the printer (ender 3v2) that's causing the problem, but I definitely won't be purchasing it again.
Translated from Greek ·Did you find this review helpful?The result is excellent. As for handling, it should not be exposed to moisture, you can put a brim around the piece to prevent it from detaching. If you don't have a dry box and it produces strings, print a retraction tower in the end to see at which temperature you should print. I am satisfied anyway. I will buy it again when it runs out.
Translated from Greek ·Did you find this review helpful?I understand why there is complaining. It smells and produces threads. I believe that it needs a lower speed and temperature in order to not produce threads. My first print did not turn out well, but the other two came out fine. It is not for 220°C, better at 195°C and 150mm/sec for me with Sonic Pad. (without Sonic Pad, if the printer is good, up to 100mm/sec and increase the retraction, which is how much the filament should be pulled back before changing layers). Some inconvenience BUT the result is indeed wood. And that is what matters.
Translated from Greek ·Did you find this review helpful?Wonderful filament! I had no issues printing it at a temperature of 220-230 degrees on a PEI bed surface. It adheres well to other materials like PETG, as shown in the photo.
Just keep in mind that it has a strong smell when printing, due to the wood content.
Lastly, it would be good to finish the print with a simple PLA to clean the nozzle from any residue of this filament, to prevent clogging.Translated from Greek ·Did you find this review helpful?It has a big problem with the temperatures it works with, as the coil detaches before it finishes what you want to print. Or it just stops working in general, it has a big issue. I will not prefer it again. This doesn't happen with the other colors, I don't know because it has advertised wood as a beautiful material, but it is difficult to use
Translated from Greek ·Did you find this review helpful?Verified purchase
Very good quality
Translated from Greek ·Did you find this review helpful?Verified purchase
easy to print...
Translated from Greek ·Did you find this review helpful?Verified purchase
Verified purchase
Verified purchase
Verified purchase
Verified purchase
Verified purchase
Verified purchase
Deals
Technology
Home & Garden
Fashion
Sports & Outdoors
Health - Beauty
Baby & Kid
Auto - Moto
Business - B2B
Books