It is central and can be used either as the main option for heating the water in your home, or as a supplementary. It can provide hot water throughout the house for your daily needs, as long as there are suitable pipes for the distribution of hot water. This may potentially result in heat and energy losses due to the distance.

The adjustment of the water outlet temperature is done proportionally and depends on the water flow rate, according to the selected power.

• Easy and quick installation.
• Automatic ignition when the tap is opened.
• Electronic ignition via two 2D type alkaline batteries.
• Two operating modes (winter or summer).
• Flame intensity adjustment. – Maximum water flow adjustment.
• Multiple safety valves.
• Exhaust gas monitor.
• Hybrid installation capability (the device automatically stops combustion when the inlet water temperature reaches 42°C).

The instant water heater is a type of water heater that heats water in real-time. It only heats the water that passes through it at that moment. There is no hot water storage tank. This has many advantages, such as energy savings, since only the water that is used is heated, and longer lifespan, as there is no water tank and no accumulation of salts on the resistance and other components.

It operates with liquefied petroleum gas (LPG), and no electrical installation is required.

Connection to the LPG cylinder with a valve at 28 mBar is necessary.

The instant water heater has a cold water inlet pipe, which passes through the heating element, gets heated, and exits through the hot water outlet pipe. A necessary condition for the instant water heater to initially function is the pressure of the cold water inlet should not be too low.

The water temperature is regulated by a thermostat, so it does not exceed a maximum value. The temperatures that the hot water reaches are preset so that one can use the hot water directly, without needing to mix it with cold water.

The maximum temperature it can reach for hot water production is 42 °C, while the maximum water flow rate reaches up to 10 liters per minute. Indicatively, 38-42 °C degrees are standard for shower use.

• It is small in size and does not take up much space.
• There are no energy losses, as only the water being used at that moment is heated. Therefore, we save on the electricity bill. In a traditional water heater, the hot water that is not used goes to waste.
• The hot water used in the instant water heater is used as is, without mixing with cold, as happens in a traditional water heater. Thus, we also save water, in addition to electricity.
• There is no need to wait for the water to heat up. As soon as we turn on the tap, hot water flows in a few seconds. The traditional water heater takes a few minutes, depending on its size.
• The hot water never runs out. As long as we have the tap open, we will have hot water.