APPLICATION

SURFACE PREPARATION

• To ensure proper adhesion of the product, the surface to be painted must be cleaned of dust, grease, oils, peeling old paints, rust, mold residues, or moisture.
• For new or porous surfaces, first apply the corresponding recommended primer of the product (Life dur, Life dur water).
• Apply the product in 2 coats (after shaking it well) which should be spaced 1 - 2 hours apart.
• The product achieves all its mechanical strengths after 20 - 30 days.

APPLICATION CONDITIONS

• Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is greater than 80%. Adverse conditions during application can alter the final properties of the paint.

APPLICATION TOOLS

• Brush
• Roller
• Paint sprayer

During work, keep the tools "wet" in the container or the product holder. Squeeze the tools well back into the box and clean them immediately with warm water and soap. If the product dries, it can only be removed with strong detergents. Do not dispose of washing liquids in the groundwater.

WARNING: Wear protective gloves / protective clothing / eye / face protection. In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if easy. Continue rinsing.

COVERAGE

8-12m2 / L per coat

DILUTION

First coat: 15% water. Second coat: 5-10% water

DRYING TIME

1 - 2 hours depending on application conditions