Purchase date: 5/19/2023.

First impressions:
I had to put a small piece of wood under the mechanism because the previous mechanism was 24 centimeters, so the screw was loose. I had calculated it though, so it doesn't lose from there.

However, what I hadn't calculated was that the strike plate is too wide and I had to file it down because the door wouldn't close otherwise.

Things to consider during installation:
You will probably need to make some extra holes, but nothing crazy.
The 2 screws that connect the exterior with the interior have a thin thread, so cross threading can easily occur. For the first few turns, you shouldn't apply any force. I experienced it once, luckily it has a slightly shorter third screw (in case someone has a thinner door), so I used that one.

Other than that, if you watched the video that makes a sound every time it unlocks, there is an option to turn off the sound.

Batteries are not included (it takes 4 AAA).

The key is only on the outside (as from the inside, if you lower the handle, it unlocks anyway).

Sometimes it unlocks from the outside but doesn't open, so you have to do it from the top to match it with the inside (this may have happened because I tightened it too much, so there is enough friction).

I haven't used the card, so I don't have an opinion. I mainly use the fingerprint function, which works fine.

The code also works perfectly.

The construction is metallic with a nice feel/appearance.

The lock is easy to install and use, what I don't like is its compatibility with Google Home. I would also like the numbers on the keypad to light up when you touch them. What happens is that you have to touch the fingerprint sensor to be told that the fingerprint is not recognized and then the numbers light up. These details would make the process simpler and easier, something that confuses my customers sometimes for my own use. Nevertheless, in terms of quality and appearance, it is a very reliable and nice smart lock.