• Option for V/F Control, Sensor-less Vector Control (SVC), and Feedback Vector Control (FVC)
• Automatic torque boost and slip compensation
• Fast acceleration and deceleration performance
• 150% torque at 0.5Hz
• Provides precise speed control <0.5%
• Accepts wide input voltage from 300V to 480V
• Conformal coating for harsh environment resistance
• Built-in RS-485 MODBUS communication
• Built-in dynamic braking unit
• Simplified parameter setting for easy startup
• Standard potentiometer and external keypad support
• Flexible programmable I/O connection
• Controls motor deceleration to stop in case of sudden power outage to prevent damage

• Input Voltage: AC,3PH,380V(-15%)~440V(+10%)
• Rated Frequency: 50/60 Hz
• Frequency Range: +/-5% (47.5 ~ 63Hz)

• Output Voltage: 0- Input Voltage
• Maximum Output Frequency: 0.1 ~ 500HZ
• Output Power: 9 A
• Output Current Please refer to Rated Parameter table

• Highest frequency: Vector control: 0~500Hz, V/F control: 0~500Hz
• Carrier frequency: 0.8KHz~8KHz (Support up to 16KHz carrier frequency), Adjusted automatically according to the load characteristics
• Input frequency resolution: Digital setting: 0.01Hz, Analog setting: Highest frequency x0.025%
• Control mode: Open-loop vector control (SVC), V/F control
• Starting torque: 0.5Hz/150% (SVC)
• Adjustable speed ratio: 1:100 (SVC)
• Speed control accuracy: +/-0.5% (SVC)
• Overload capability: 150% of rated current: 60 seconds, 170% of rated current: 12 seconds, 190% of rated current: 1.5 seconds
• Torque boost: Auto torque boost; Range of manual torque boost 0.1%~30.0%
• V/F curve: Three types: Linear, Multi-point, square curve (1.2 power, 1.4 power, 1.6 power, 1.8 power, 2 power)
• V/F separation: Full separation, Half separation
• Acceleration and deceleration time: Linear and S-curve acceleration and deceleration modes available. The range of acceleration and deceleration time is 0.0~6500.0s.
• DC braking: DC braking frequency: 0.00Hz ~ Maximum frequency, Braking time: 0.0s~36.0s, Braking current value: 0.0%~100.0%
• JOG control: JOG frequency range: 0.00Hz ~ Maximum frequency (5Hz in default). JOG acceleration and deceleration time: 0.0s~6500.0s.
• Built-in PID: Simplify the establishment of a closed-loop control system
• Automatic voltage regulation (AVR): Keep the output voltage in stable when the grid voltage fluctuates.
• Stall prevention from overvoltage and overcurrent: The current and voltage are limited automatically during operation to prevent frequent tripping due to over-current and over-voltage.
• Rapid current limit: Reduce the risk of over-current faults to keep VFD operated normally.
• Torque limit and control: Limit the torque automatically during operation to prevent frequent tripping due to over-current.
• Braking unit: Built-in braking unit for 18.5KW and below models

Deceleration to stop: In case of power loss, the energy from the load feedback is used to compensate and decelerate the motor to a stop, to avoid mechanical damage.
Fast current limiting: Reduces the risk of overcurrent faults to maintain normal VFD operation.
Timer control: Adjustment range: Adjustment range: 0.0Min ~ 6500.0Min

Communication: Modbus

Command source: Operation panel, control terminal, and serial communication port.
Frequency source: Digital setting, analog voltage setting, analog current setting, pulse setting, and serial port setting.
Auxiliary frequency source: 5 options for providing flexible detailed auxiliary frequency setting and frequency synthesis.
Input terminals: 4 digital input terminals, one of which supports high-frequency pulse input up to 50kHz
Output terminals: 10V or current input 0 ~ 20mA.

LED Display: Display parameters
Key lock and mode selection: Allows users to partially or fully lock the keys or set the operating range for some keys to avoid incorrect operation
Protective function: Protection: motor short circuit detection during activation, output phase loss protection, overcurrent protection, overvoltage protection, undervoltage protection, overheating protection, overload protection, etc.

• Storage temperature: -20°C ~ 60°C
• Operating temperature: -10°C ~ 50°C (If the temperature is higher than 40°C, the output capacity will decrease by 1% per 1°C increase)
• Storage humidity: <90%RH
• Operating humidity: <90%RH
• Noise level: 50dBA max.

Communication port: RS-485