The instant water heater RX-001 v2 It operates with electric current and is a three-phase model, which means that three-phase current is required in the panel, which needs only 2 phases and grounding.

While a traditional water boiler heats a large amount of water consuming a lot of energy and time, the instant water heater does not have a hot water storage tank and only heats the water that passes through it. Thus, in a short time, you have hot water only when you need it and only for the quantity you use at that moment. This makes it an economical solution, while also having a longer lifespan as there is no water tank, therefore no accumulation of salts in the resistance and other components.

As long as you have the faucet open, you will have hot water that is used as is, without mixing with cold water as in the traditional water boiler. Of course, a necessary condition for it to operate is that the pressure of the cold water inlet is not too low. In cases of lower input temperatures in winter and higher temperatures in summer, the performance may vary accordingly.

It is easily and quickly installed on the kitchen sink and fully replaces the classic faucet. It is easy to use or maintain and serves everyday needs such as hand or dish washing.

It is equipped with a built-in digital display that shows you the temperature of the water and at the same time allows you to choose it yourself. The maximum temperature it can reach for hot water production is 60 °C, while the maximum water flow rate reaches up to 2.2 liters per minute.
Indicatively, 38-42 °C degrees are the standard for shower use.

Features and Dimensions

• Maximum Power: 3kW
• Maximum Flow Rate: 2.2lt/min
• Maximum Temperature: 60°C