Relay for automatic activation of medium or high beams with reduced lighting strength from 20% to 80%.

• The "-DIS" input (white wire) is for deactivating the relay from the light switch (position ''lights'').
• The "+DIS" input (black) is for deactivation with +12V, for example from the position lights (small lights).
• After the starter motor activation "+12V" (brown), the relay activates the lights once the voltage is above 13.2 V and 5 seconds have passed.
• After the starter motor activation, the lights remain on for another 13 seconds for the "Follow Me Home" function.
• The function can be deactivated by removing the jumper which is visible in the box.
• If the car installation does not have a separate connection for the left / right headlight, the outputs can be connected in parallel.
• The voltage reduction to the lamps (usually to the high beams) is done with a trimmer potentiometer in front of the box.
• Recommended range: 20%-50%. The factory setting is 20%.
• Box size: 40x28x22mm.
• Allowed output power: 120W (2x60W).
• The device does not have short-circuit protection for the power supply circuit!
• Always use a 12 V fuse before direct connection.