The Black & Decker power drill driver operates on an 18 Volt battery. It is suitable for both screwing and unscrewing, as well as drilling holes in wood, metal, and various other construction materials. It stands out for its impact function, which provides high power to easily and quickly complete even the most demanding tasks. It has the ability to adjust the rotational speed depending on the task (low speed for screwing, higher speed for wall drilling, maximum speed for concrete drilling).
Capabilities
Rechargeable two-speed lithium battery impact drill driver. The powerful two-speed impact drill driver with high performance delivers 21,000 impacts per minute for fast and efficient drilling. Its ultra-compact and lightweight design makes it ideal for use in confined spaces. With 11 different clutch positions for precise control in drilling wood, metal, plastic, and for all screwing applications.
LED lighting
The LED lighting provides better visibility in low-light conditions. The lithium battery can hold its charge for up to 18 months while the tool is idle, meaning it is ready for use when you need it.
Additional Features
2 Speeds - High speed for drilling into wood and metal, Low speed for controlled driving
10-position clutch provides precise control for drilling into wood, metal, and plastic, and for all screwdriving tasks
Always ready to use - the lithium battery holds over 80% of its charge for over 90 days when the tool is not in use. No need to charge the unit before each use
Variable speed switch for ultimate control in all drilling and screwdriving tasks
Spring-loaded battery system for quick and simple battery changes and a more secure fit
Anti-slip soft grip provides comfort when the drill driver is in use
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can
report it here.
Ideal for amateur use. It drills wood, metal, and wall. Its battery doesn't discharge at all. Left forgotten in the storage, I needed it and it worked just fine.
It is lightweight and easy for small jobs.. for holes in concrete, although it says it is a hammer drill, it doesn't perform as one. Also, the 1.5 ah battery is very small and drains quickly. For half the price, you can get Parkside with four batteries
In 3 years of amateur work, it broke down on me.
1. The chuck did not have a good grip from the beginning.
2. 4 times it warned me with smoke and the smell of burnt plastic or wires after drilling into concrete.
3. The battery lasts around 2-3 hours on average, based on my own calculations.
4. Ideally, its job is probably for holes in wood or something soft in the end, where I believe it is immortal.
It tightens the chuck very easily. It works well. It broke within a year. It worked 5 times. It tightens the chuck in wood. I tried to drill concrete and the chuck came off with a screw
I have opened the world's holes in concrete and plaster bricks...it enters effortlessly. The main reason I bought it was for its impact. It made me look good. The only issue I have is that the chuck loosens very easily.
Very nice drill with a lot of power for the use I make of it. POSITIVE: 1. Its impact is incredible and it drills through concrete blocks effortlessly. 2. The clutch it has to prevent screw stripping works very well and reliably. 3. The chuck works with good accuracy. 4. The speeds are fine, although I would like the second speed to be faster, but it still gets the job done. 5. The motor is quite powerful and doesn't heat up much even under heavy use. NEGATIVE: 1. Its battery is relatively small, so for more professional use, it would be worth considering purchasing a larger one or another one with the same capacity. 2. The chuck sometimes loosens when I'm driving screws and doesn't tighten easily and reliably. 3. The motor has shut off a couple of times under heavy use, but when I put it in reverse and then back to normal, it works fine again (probably a safety feature to prevent overheating). 3. The battery doesn't have an indicator to show how much power it has left, so you don't know if it's empty or full. Conclusion... I really like this machine and it works great for the tasks I need it for. And in case it lacks power, I have a corded impact driver to rely on. For its price, it's a complete package. Now, I don't know how long it will last, but for now, it seems great, especially if I change the chuck and replace it with an iron one (if I can). That would be perfect. UPDATE 13/2/2023: I tested it on a pile of things, even a 25mm wood drill bit, and it easily made clear holes in about 5cm hard wood, averaging 13.5 holes with the second speed and a cheap wood drill bit. In other words, it's not worth it. With a better one, it would definitely take less time. I pushed the drill to its limits and it did get quite hot due to the brushed motor, but it didn't stop working because of temperature in any task I used it for. I was impressed by how much power it had. It will definitely be tested harder in future projects. If you let it rest a bit because excessive heat or load is the only thing that can damage it, it will never break and it will definitely get the job done for you. Now, if you want to drive large screws, this beast is not for you. It can handle screws up to 5cm, drills easily through wood, iron, and walls, but for driving large screws, you need an impact driver, not a cordless drill
Those of us who bought it for 54 euros made (easily) the purchase of the year.
Very good product, branded and with a 2-year warranty.
Very powerful for 18v and with a strong impact!
UPDATE almost 2 years later. It continues to work perfectly.
Deals
Technology
Home & Garden
Fashion
Sports & Outdoors
Health - Beauty
Baby & Kid
Auto - Moto
Business - B2B
Books