Thanks to Inverter technology, it maintains a stable temperature and lower consumption compared to simple instant water heaters as it uses only the necessary power to heat the water to the desired temperature.

Compatible with solar or boiler systems and can be installed in series with them, utilizing the existing lukewarm water to achieve even greater savings.

The operating power and consumption is controlled by the electronic brain according to the temperature and flow of the incoming water, to select exactly the desired temperature and keep it stable.

The selected temperature ranges between 30 c and 55 c, is adjusted with touch buttons and displayed on the large screen, where the operating and programming options are also shown. 

In the menu, you can see the consumption in kw at any time. 

It has 2 temperature memories that you can easily set for each use:

Example: 1 for a temperature of 35 c for hand washing and 2 for a temperature of 42 c for a shower or any other temperature you desire. 

The instant water heater has a cold water inlet pipe, which passes through the resistance, heats up, and exits through the hot water outlet pipe. A necessary condition for the instant water heater to initially operate is the pressure of the cold water inlet must not be too low.

The water temperature is regulated by a thermostat, so it does not exceed a maximum value. The temperatures that the hot water reaches are preset so that one can use the hot water directly, without needing to mix it with cold water.

The maximum temperature it can reach for hot water production is 55 °C, while the maximum water flow rate reaches up to 8 liters per minute. Indicatively, 38-42 °C degrees are standard for shower use.

• It is small in size and does not take up much space.
• There are no energy losses, as only the water being used at that moment is heated. Therefore, we save on the electricity bill. In a traditional water heater, the hot water that is not used goes to waste.
• The hot water used in the instant water heater is used as is, without mixing with cold, as happens in a traditional water heater. Thus, we also save water, in addition to electricity.
• There is no need to wait for the water to heat up. As soon as we turn on the tap, hot water flows in a few seconds. The traditional water heater takes a few minutes, depending on its size.
• The hot water never runs out. As long as we have the tap open, we will have hot water.