Network IP entrance panel Master Module with the ability to expand calls, read cards, keyboard, etc., with a high-sensitivity and high-quality image High Definition color camera.
Characteristics
Network IP entrance panel Master Module with call extension capability, card reading, keyboard, etc.
Microphone and speaker 85 dB with noise suppression / echo cancellation
1 call button with automatically activated backlight with nameplate dimensions 58 x 11.7 mm
Ethernet port and RS485 port with power output for connection with other (up to 8) modules
2 relay outputs 30 VDC / 1A for control of up to 2 electric locks (strike / electromagnets)
4 inputs for connection of up to 2 magnetic contacts and up to 2 exit buttons (for 2 doors)
Divisible terminals for inputs / outputs
Tamper button, waterproof rating I
P65 Power supply PoE or 12VDC
Consumption 10 W (the power supply for the electric locks must be provided by a separate power supply)
Dimensions: 99.8x43.9x98 mm.
Camera Features
Color camera High Definition 1080p
Fish eye lens ultra-wide viewing angle 180°
Infrared lighting (IR)
H.264 compression
BLC: Compensates for light on the object in the front
DNR: Removes image noise in low light
WDR: Provides quality images in conditions of stronger light contrast
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can
report it here.
A very good product with excellent capabilities. I have used both the 2-wire version and the TCP/IP version, powering all devices easily and quickly through POE. The notification and control of the door from the mobile phone is a must. The device can also be connected to a recorder, so now you have not only an intercom but also recording or monitoring of the area. With the appropriate additions, you can also have control of the entrance with a card or a code. Also, the ability for someone to leave you a message in case they can't find you at home or the office, etc.
I bought this product along with the Nametag module, which provides 6 additional buttons, and the external box for these 2 modules. The total cost for these 3 pieces was around €230, and essentially I created an external button panel with 7 buttons. The reason we purchased it is because it supports the SIP protocol, so it could be connected to our VoIP telephone system in order to route each of the external buttons to any internal phone with any IF scenario.
Unfortunately, in practice, the device supports SIP in its own way and had several bugs during setup. I have been in contact with Hikvision's technical department for Europe, but we haven't been able to find a solution. It seems to only work with other devices from the same company, which doesn't make sense for SIP technology. We purchased another SIP intercom from Fanvil, which we installed in 5 minutes and it worked perfectly without any issues.
Deals
Technology
Home & Garden
Fashion
Sports & Outdoors
Health - Beauty
Baby & Kid
Auto - Moto
Business - B2B
Books