The Vorel Upper Tank Spray Gun 1.5mm 81618 is used for painting tasks. Compressed air is essential for the proper functioning of the gun. The paint in the gun's tank and the compressed air supplied to the gun create a mixture of paint and air particles at the gun's nozzle outlet.

Features:

• Starting: Using a wrench, tighten the nozzle. Check the tightness and sealing of the compressed air supply system connections. Blow out the air supply hose before connecting it to the system. Before using the Vorel Upper Tank Spray Gun 1.5mm 81618, ensure it is properly cleaned and maintained. Make sure the container with the coating material is connected in such a way that it is properly sealed.
• Adjustable spray jet width: The width and shape of the spray jet can be changed by rotating the air nozzle. The shape of the stream can be smoothly adjusted from flat to round depending on your needs. The amount of coating material supplied to the airflow is adjusted by the control knob for the amount of coating material. On the other hand, the intensity of mixing the coating material with the air is adjusted via the spray control switch. It is recommended to adjust the flow of the mixture in such a way as to obtain the smallest possible particles of the coating material, thus ensuring the best distribution of the coating material on the surface.
• Working with the Vorel Upper Tank Spray Gun 1.5mm 81618: When using the gun, the distance between the gun's outlet and the surface to be covered should be maintained in the range of 10 to 15 cm. Try to guide the gun's outlet perpendicular to the surface to be coated. Avoid arc movements, as they will cause uneven distribution of the coating material. It is recommended to apply several thin layers instead of one thick layer.
• Airflow adjustment: Depending on the type of coating material, the amount of compressed air should be selected by adjusting the air pressure adjustment knob. If the gun is not equipped with a pressure adjustment knob, the pressure should be adjusted in a pneumatic system, e.g., with a reducer.
• Nozzle replacement: Be sure to replace the entire nozzle set. The kit includes a coating material nozzle, needle, and air nozzle.
• Cleaning and maintenance: After completing work with the Vorel Upper Tank Spray Gun 1.5mm 81618, disconnect the gun from the compressed air system and empty the tool container of any remaining coating material. Thoroughly clean the tank of residual coating materials. Clean the entire coating material transfer path thoroughly. Inaccurate cleaning will reduce the flow performance of the coating material. Clean the air nozzle with a brush dipped in solvent. Never immerse the gun completely in solvent. Never clean clogged openings with hard objects as even slight internal damage can negatively affect the spray gun parameters. After washing the Vorel Upper Tank Spray Gun 1.5mm 81618, a small amount of lubricant should be applied to the moving parts of the seals.

Tighten the coating material nozzle enough to avoid leaks and keep the needle moving smoothly