Midi case with elegant RGB LED design featuring 13 unique lighting functions, 6 RGB flows, and 7 static color functions. The holes on the lower right side of the front increase airflow and...
Midi case with elegant RGB LED design featuring 13 unique lighting functions, 6 RGB flows, and 7 static color functions. The holes on the lower right side of the front increase airflow and circulation.
Midi case with elegant RGB LED design featuring 13 unique lighting functions, 6 RGB flows, and 7 static color functions. The holes on the lower right side of the front increase airflow and circulation.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can
report it here.
There is no space for cable management and it has terrible airflow, which results in heating up your computer and causing it to make more noise.
Also, the power supply is placed right next to the drawers for the hard drives, making it a nightmare to fit everything in, especially if you don't have a modular power supply.
The front RGB is nice, but it also means that there is no airflow from the front, which is a problem.
There is only space for fans on the top and back (which comes with it) and 2 at the bottom, which doesn't make sense as it can't exhaust the hot air or bring in fresh air.
POSITIVES
RGB
Has plenty of USB ports and has an SD/micro SD reader
Affordable
Magnetic filters on the power supply and top fan
For the money of 36 euros, it is good but don't expect something super. Difficult motherboard installation, awful cable management, cheap construction, you would think that if you push it a little, it will fall apart. Mediocre airflow, it collects a lot of dust inside. Spend a little more and get something better.
For its price, it's fine, although there are better options. In terms of construction, it focuses more on the aesthetic aspect rather than performance, which is not necessarily a bad thing, but because of this, the small hole in the front for airflow cannot take in enough air for processors like the Ryzen 5 3600 without powerful fans and a cooler. At first, it doesn't seem like enough space for cable management, but if you pass the basic cables before installing the motherboard, and leave some space between the power supply and the SATA, then it turns out somewhat well. The airflow is unacceptable, I have installed three Arctic fans in the front to help the computer breathe a little (of course, in the front it just has a very small hole to take in air). When I ran benchmarks without the front panel, the Ryzen 5 3600 dropped by 12 degrees, which can be solved with a very good cooler, but it would be good to go for a case with better airflow when dealing with 'hot' processors.
I set up a computer relatively easily, the two negatives that I will point out are that the back panel does not leave space to tie cables, so cable management is basic in order to close the lid. Also, its window is made of very cheap acrylic and tinted, so if you don't have strong lighting inside, nothing will be visible. For its price, it's okay, I was looking for something immediately available, otherwise, with a €5 difference, the Kolink Stronghold is much better in terms of quality
A very good case for its price, beautiful, relatively spacious, good airflow if the appropriate fans are installed correctly, and satisfactory cable management. An experienced person will easily set up a system
Very beautiful and spacious case with nice RGB, but lacks cable management space. The fan it comes with is quiet and the side window is simply impressive. I believe it is a good choice for a budget PC!
I give it four stars because it doesn't have the best cable management and I don't have an opinion yet on whether it cleans well because I've only had it for three days.
I have set up 3 systems with this case for friends.
Very good in terms of space and interior design, very nice and compact dimensions.
Ideal for budget systems at the cost of 40 euros.
It is quite high-quality and sturdy, although the construction material is relatively thin.
The LED strip in the front with the separate control button for colors and effects is a very good addition, and it has several of them. In a dark space, it is very impressive while also providing subtle lighting to the interior.
On the top, apart from the 2 USB2 and 1 USB3 ports, it also has a card reader.
In terms of appearance, the cut-out to display the power supply and the provision to screw an SSD parallel to the motherboard give it extra points.
It has plenty of available slots for 120mm fans, but 140mm fans cannot be installed. The provided rear 120mm fan is very quiet and has a long cable, making it easy to connect to various motherboards.
If you decide to install front fans, it only has one opening on the right side for air intake, so the airflow may not be as good.
For the top 120mm fan, it has a magnetic dust filter, and for the PSU ventilation hole at the bottom, it has a simple slide-out filter.
Finally, there are several scattered holes for the admittedly very long cables from the front panel to pass through.
As for the negatives.
There is minimal available space behind the cover with very few points to secure the cables.
Cable management is really difficult, and if you have thick PSU cables, it will give you a hard time when trying to close the right cover, which is completely flat.
It would be helpful to have a bulge, but there isn't one. :(
Also, the available space from the PSU to the HDD cage is relatively small, and if you have a modular PSU, it will pose the same difficulty.
Apart from these two issues, I recommend it. It is a pretty good and overall beautiful case.
I haven't bought it yet, but from what I saw, it seems good and I believe it will help me. It also has good lighting, so I will be able to use it at night
Guys, for its price, it has been very convenient for me. It has spaces for cable management, it also provides cable ties. It has 2 drawers for HDD or SSD and it also has 3 additional slots for SSD, one in the front and two in the back. It has space for fans, 3 in the front, 1 in the back, 2 on top, and 2 on the bottom. It comes with a pre-installed fan at the back
Very beautiful case with extra points for the acrylic window and the LED lights, if you want to create a system that looks nice. It also has good airflow despite having a small space for front air intake. My fans never need to run above 1200rpm and the temperatures are very good in all parts of the case.
It has plenty of space in the front and can easily accommodate triple graphics cards and extra fans for them, above the PSU shroud. The problem is the space in the back where it is not sufficient to "hide" the cables nicely and it does not have enough anchor points. However, it can fit 3 SSDs, 2 HDDs, and a total of 7 fans.
It is absolute value for money. For the money you give, you get a very nice case with easy cable management. I am truly amazed... Also, whoever gets it, a tip: pass the cables before connecting the motherboard