Reviews by our members

• 3

  Kastrinos

  2022-11-10

  This is a table saw with not great accuracy. It is integrated into the construction of a wooden bench. It bothers me to "bring" it for a 90-degree cut because when the safety for the height tightens, the angle shifts slightly, but measurably. When I want to cut at 45 degrees, it is almost unacceptable because although it will cut the wood at 45 degrees after a lot of effort to adjust the angle, the blade is not parallel to the straight line of its base, resulting in the wood burning. In cuts before it was integrated into the bench, the laser was off. The blade on top does not cut quickly and I will go for a replacement as soon as possible. You can see the construction and the table saw in action in the video below and in the playlist with woodworking on my channel.
  https://www.youtube.com/watch?v=tfLegRwkzcY&t=937s&ab_channel=NikitasHomeworks

  Translated from Greek · Show original

  • Stability

  • Vertical cutting
  • Cutting speed
  • Construction quality
  • Value for money

  • Bevel cutting

  • 
  Did you find this review helpful?YesNo

  Report
• 1

  8 out of 8 members found this review helpful

  dim.x

  2021-07-01

  25 years technician.
  Its plate (essential for a circular saw) is crooked from any side you imagine in relation to the blade, as the plate separates the blade from one side, you bring it perpendicular to the blade, and from the other side, it has a 5mm difference (crooked plate).
  The blade, in relation to the plate (parallel to it), has a 7mm difference between the front and back side (a shame).
  When I saw this, I took it back and sent it to the dealership, and the dealership returned the same circular saw with a sample of cut wood, which supposedly proved that the wood was cut correctly according to them, and therefore there is no problem.
  I said to myself, you guys don't know... I will fix it myself.
  I bought a 7mm aluminum plate, did some work on it, and installed it on the circular saw. What I later discovered is that the system that supports and connects the plate to the circular saw is very weak, resulting in the circular saw bending and losing its alignment with the blade and the plate when pressure is applied from below.
  All of the above means that you cannot make straight and perfect cuts and angles with a tool that you bought for this job. Well, this tool cannot do this job, so it is useless. Similarly, the company that did this showed that they don't even know the basic technical aspects.
  I still have another tool from the same brand, and it's the same there.

  Translated from Greek · Show original

  • Cutting speed

  • Vertical cutting
  • Bevel cutting
  • Stability
  • Construction quality
  • Value for money
  Did you find this review helpful?YesNo

  Report
• 1

  6 out of 6 members found this review helpful

  harishanos

  2021-03-04

  Waste of money!! It loses from everywhere. I tried to cut and it started wandering. At 90 degrees, I put a triangle and it lost almost an inch. I bought it to cut at 45 degrees and then I put a triangle elsewhere. It doesn't do the job at all. It loses its way as it cuts, the angle changes because it doesn't tighten well. The laser and the guide are useless. If you want it for small tasks, it's okay. Otherwise, don't waste your money... get something with a little more money. I would like to try the total for the same price since it has good reviews, but it wasn't available in Athens so I bought this one. Tomorrow it will be on the marketplace for anyone who wants it

  Translated from Greek · Show original

  • Cutting speed

  • Vertical cutting
  • Bevel cutting
  • Stability
  • Construction quality
  • Value for money
  Did you find this review helpful?YesNo

  Report
• 5

  ANTONIS DERVI

  2020-07-28

  Verified purchase

  • Vertical cutting
  • Bevel cutting
  • Stability
  • Cutting speed
  • Construction quality
  • Value for money