Reviews by our members

• 3

  1 out of 1 members found this review helpful

  giannis199729

  2023-06-25

  Verified purchase

  This review is about the colour: White

  Personally, I wouldn't buy it again. Yes, it's affordable, but it obviously lacks the quality of a more expensive thread. You can get the job done, but it requires much more effort because you have issues with the printer compared to a better one. Tested on ender 3 pro and ender 5 plus

  Translated from Greek · Show original
  Did you find this review helpful?YesNo

  Report
• 4

  0 out of 1 members found this review helpful

  ilfritza

  2023-03-30

  Verified purchase from Cosmo-market

  This review is about the colour: Black

  At #TED3D we have tried a plethora of filaments, it is quite decent for its price, without meaning that there are no better and/or more economical options

  Translated from Greek · Show original
  Did you find this review helpful?YesNo

  Report
• 5

  MICHALIS_SPANOS

  2022-12-06

  Verified purchase

  The first print I made by purchasing an Artillery hornet was with this green PETG. I preferred it over PLA due to its resistance to temperatures, hardness, and factory settings (240 C, 80 C, etc.). The prints came out perfect (for me) as well as with the black, but the red and blue semi-transparent ones gave me more difficulty (the material comes out harder...)

  Translated from Greek · Show original
  Did you find this review helpful?YesNo

  Report
• 5

  GEORGE_KONIARIS652

  2022-07-11

  Verified purchase

  This review is about the colour: White

  good for its price came in a well-packaged manner

  Translated from Greek · Show original

  • 
  • 
  • 
  Did you find this review helpful?YesNo

  Report
• 5

  2 out of 2 members found this review helpful

  Yiorgos_Theo21

  2022-06-29
  This review is about the colour: Black

  I bought it 2-3 years ago, it was the first one I tried to print with and I was really disappointed, I couldn't achieve a decent print no matter what. I put it aside and picked it up again about a month ago when I ran out of ABS that I use. The prints came out perfect! I believe the initial negative impression was due to my inexperience, the filament prints just fine, the quality seems a little better than ABS and it has no issues with smells and warping. 0.6mm nozzle, 0.3mm layer height, 240°C nozzle temp, 85°C hotbed temp, 6mnm retract @50mm/s

  Translated from Greek · Show original
  Did you find this review helpful?YesNo

  Report
• 5

  geosfak

  2021-03-15

  Verified purchase

  This review is about the colour: Yellow

  I still need some fine tuning on the settings, but the material seems very good... I seemed to have the correct result at 250 degrees with a bed temperature of 70 for good adhesion... time will tell

  Translated from Greek · Show original
  Did you find this review helpful?YesNo

  Report
• 5

  Fokion_Malkotsis

  2021-03-09

  Verified purchase

  This review is about the colour: Yellow

  Impeccable.
  Within specifications.

  Translated from Greek · Show original

  • 
  Did you find this review helpful?YesNo

  Report
• 

  2

  2 out of 2 members found this review helpful

  Keno

  2020-11-01Expert user
  This review is about the colour: Black

  I don't know if I got a bad coil or if it's just a bad filament, but compared to other brands of the same price, it's disappointing

  Translated from Greek · Show original
  Did you find this review helpful?YesNo

  Report
• 4

  Traianos_Papanikolaou

  2024-06-05

  Verified purchase

  This review is about the colour: Red

  The price fluctuates as if it were a stock market depending on the color and stock

  Translated from Greek · Show original
  Did you find this review helpful?YesNo

  Report
• 2

  johnpapast

  2024-04-12

  Verified purchase

  This review is about the colour: Black

  There are more quality and cheaper ones than this, it requires special attention to temperatures.

  Translated from Greek · Show original
  Did you find this review helpful?YesNo

  Report
• 5

  Chris_Arapis8493

  2024-02-02

  Verified purchase

  This review is about the colour: Red

  ALL GOOD.............!!!

  Translated from Greek · Show original
  Did you find this review helpful?YesNo

  Report
• 5

  Vagelis_Rotas

  2023-06-27

  Verified purchase

  This review is about the colour: White

  Excellent! I didn't expect to be able to print on the first try... very good result... 250C 70C

  Translated from Greek · Show original
  Did you find this review helpful?YesNo

  Report