Electric paint spray gun TC-SY 700 S with detachable spray head, adjustable color flow and adjustable nozzles.
Delivery materials:
2 nozzles
Cleaning brush for tubes
Needle for cleaning the nozzles
Container for checking the density of the paint
Lid for the container
1000ml container with scale
Capabilities
The Einhell TC-SY 700 S electric paint spray system is a semi-stationary system for medium to large work surfaces and is adapted for varnishes, glazes, and interior wall paints. The shoulder strap and 3.5-meter flexible air hose provide great mobility and make the TC-SY 700 S suitable for all creative and practical painting tasks with varnishes, glazes, and interior wall paints.
Easy to use
Easy to use and clean, the paint spray system is an ideal tool for both beginners and experienced DIY enthusiasts. The paint flow adjustment allows for precise control of the amount of paint applied. The adjustable air cap for vertical, horizontal, and round jets provides flexibility and freedom for creativity while working. To prevent the buildup of stubborn dirt, the spray head is detachable, allowing all elements that come into contact with paint to be cleaned.
Comfort and Functionality
The device is easy to clean thoroughly when the job is done. The non-twisting air hose prevents the annoying twisting of the air hose and thus facilitates its use. Thanks to the comfortable soft grip, the paint sprayer fits securely and nicely in the hand. The integrated sled pull provides flexibility during work and at the same time a practical, space-saving solution for storing the hose.
Delivery Materials
The product is delivered complete with two nozzles for different viscosities of varnish, varnish and paint, a cleaning brush for cleaning the intake, a cleaning needle for cleaning the spray nozzle as well as a container for testing the viscosity, a 1000 ml paint container and a perfectly fitting lid.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can
report it here.
Honest product, lightweight, and good quality for its price, but it splatters around quite a distance from the point of interest. Or I haven't found the way yet, although I tried everything. For large flat surfaces, it's just right.
So I bought this product the day before yesterday.. It has a solid construction, it's beautiful and impressive. I would say that the compressor makes quite a bit of noise, which is understandable considering it's 700 watts. The machine is lightweight and has a long hose, so it's easy to move around and doesn't tire your hand. I tested it for my job as a painter, using it to spray plastic paint with the proper dilution that I need. It covers the surface well, but what bothered me is that at the beginning, when you press the trigger to spray the paint, it spits it out a bit and scatters it, creating droplets. However, if you go over it again, it covers everything. I think it might need some adjustment because I didn't have time to look into it further, so I will come back to it later. But I'm sure that no matter what adjustment you make, it will still spit out the paint at the beginning instead of spreading it like some other specific guns. Anyway, it works great for walls, ceilings, fences, with thick paints and sagre. Of course, I'm talking about plastic paint. I will come back when I use it for varnishes and water-based primers for doors and tables. Tested on 15/7 for painting doors... No, it doesn't work and I wasn't satisfied. Also, you can't adjust the venturi in front of the opening and closing. Additionally, the previous time I used it with plastic paint and cleaned it thoroughly for about 20 minutes, it didn't spray the paint from both nozzles. It only sprayed the paint after a while. It's not suitable for professional work, only for amateur use. I won't buy it again and I don't think I will use it again
We are talking about a tool with a 700 Watt motor that makes a little more noise than the previous model I had, but it is not easily played in cleaning, only the head is removed
Excellent tool, accurate instructions, functional and ergonomic with incredibly easy cleaning.
First time using a paint gun, I followed the instructions faithfully and had amazing results.
So, you know... I bought the machine to paint the 30-year-old radiators in my house, which if I had the money, I would simply... throw away. They were that bad. Damaged, rusty... terrible. The idea of the electric paint gun that I was admiring a couple of years ago comes to mind, I go on skroutz, I see this one, I read the descriptions and I say... well, it's okay, I can spend around 70 euros... I've wasted that much on stupid things here and there. Anyway, using a brush and roller, I was sure that the result would be disappointing, so I thought... they're already going to be terrible, so let me make them terrible with the gun :) But if it works... I hit the jackpot. It should be noted that this is the first time I would be using a paint gun. I purchased the machine and immediately started the preparation which, as it turned out, was the most difficult part of the whole process. I bought an attachment for the angle grinder, which was a wire brush with very thick bristles. I sanded and resanded them, used sandpaper to remove the thick bristles left by the brush, cleaned them with nitric acid and... after a lot of effort, sweat, despair, and... stubbornness and patience, they were ready for painting. I had read in the comments here on skroutz that it sprays a lot of paint, so being suspicious, before I started, I completely closed the flow, gradually opened it and tested it on a large cardboard to see the amount it sprays. When I adjusted it to my liking (a very easy process), the rest came naturally until the end of the work... As I progressed and got the hang of the tool, I increased the flow, which also accelerated the process. In conclusion: The radiators became LIKE NEW. The machine exceeded ALL my expectations. The length of the air and power hose was just right, so I didn't feel uncomfortable at all throughout the work. I should note that it includes a strap to 'wear' the compressor and walk around while painting, but I didn't need it in my case. It is easily cleaned with nitric acid, just like cleaning a metal surface (I had seen people cleaning it). The only negative thing I found in the tool is that it is quite noisy. I have no experience with other machines of this type to have a comparison, but... as a passionate DIY-er, I know quite well about tool noises in general. Well, this one is quite noisy. After some continuous use, my ears were buzzing (literally). And I was painting in an open space. I estimate that using headphones or ear protection is necessary for prolonged use. Next, I will paint doors and cabinets with water-based paint, so I will add to the experience I will gain with this type of painting, on flat surfaces and with a different type of paint. I apologize for the lengthy description, it comes from the enthusiasm of the successful result and the smooth operation of the tool. Good luck! P.S. The four stars are clearly due to the considerable noise it produces. In all other aspects, it's a solid 5!
Very good machine and definitely value for money. Currently, it is functioning very well. I have used it for less than a month. I will return with a more detailed description after using it a little more.
At first, it didn't suit me at all and I thought the tool was rubbish because I didn't know how to use it. But eventually, I realized that I had misunderstood it and basically, it wasn't the tool's fault but mine because I didn't know how to handle it and I wondered why it was wasting so much color. So, I decided to investigate it a bit and practice with the tool, and finally, I understood that I had made a big mistake. Once I learned it, it didn't waste much color. It's worth its money and more!!!
The product is excellent! It has a powerful motor, a material quantity regulator, two nozzles, and it sprays and paints beautifully with the large nozzle without diluting the plastic wall paint. However, before you start, it requires some time and attention. After each job, thorough cleaning of the entire system is necessary. It comes with detailed Greek instructions.
Very good product. I painted fences that would have taken me 5-6 hours in about 40 minutes. Once you learn it (which is quite easy and quick), it consumes very little paint. Very easy to clean. I highly recommend it.
Update. I have now painted with every material available and the machine had no difficulty at all. Even with cold galvanization. I completed a room renovation where the gun was working non-stop for 2 weeks. I believe I pushed it to its limits and it didn't let me down. It painted furniture, doors, windows, casings, and textured walls that cannot be rolled. It is the best for amateur use. Its long air hose is a great advantage.
Unexpected positive result of dyeing! Very good machine and economical! I had read in other models that it consumes a lot of color and the vent opens a lot, but all this is not true because the vent can be adjusted and the amount of color it throws can be controlled. I painted a 40 x 40 iron with minimal wall insulation and no color came off to stain. The noise levels are low compared to a compressor, it is very lightweight, it has a 3.5-meter hose that gives you freedom of movement. Easy to handle and clean. Compared to a compressor, you never run out of air and you have the option of immediate closure and re-opening of the device. I highly recommend it!
Deals
Technology
Home & Garden
Fashion
Sports & Outdoors
Health - Beauty
Baby & Kid
Auto - Moto
Business - B2B
Books